GYSS-001 series portable pretreatment systems
GYSS-001 series portable pretreatment systems are cold-drying pretreatment systems independently developed by our company for environmental monitoring and industrial field exhaust gas analysis. For the system, anti-corrosion and non-adsorbing materials are employed in the interior, the sampling probe and pipeline are kept in a high temperature in the whole course, and the condensing part of the sampling box has a low component loss rate. The system can perform a reliable pretreatment on flue gas, and provide analytical instruments with dry and dust-free sample gas with a stable flow and intact components, and thereby ensure accuracy and validation of measurement data.
GYSS-001
PORTABLE PRETREATMENT SYSTEM
GYSS-001 series portable pretreatment systems are cold-drying pretreatment systems independently developed by our company for environmental monitoring and industrial field exhaust gas analysis. For the system, anti-corrosion and non-adsorbing materials are employed in the interior, the sampling probe and pipeline are kept in a high temperature in the whole course, and the condensing part of the sampling box has a low component loss rate. The system can perform a reliable pretreatment on flue gas, and provide analytical instruments with dry and dust-free sample gas with a stable flow and intact components, and thereby ensure accuracy and validation of measurement data.
The product is mainly used in the following occasions:
- Manual detection of flue gas emission (analysis of SO2, NOx,O2)
- Desulfurization process detection (analysis of SO2,O2)
- Denitration process detection (analysis of NOx, NH3, O2)
- Waste incineration flue gas emission detection (analysis of SO2, NOx, O2)
Specifications
- Sample gas temperature：Max.400℃(standard)
- Pre-filter：2um, stainless steel, threaded installation, 2 as standard
- Whole-course heating temperature：≥120℃
- Heating line length：3m（standard）
- Sampling probe length：1200mm
- Power supply：Aviation plug link mode, 220V/50Hz 300W
- Inlet and outlet interface：SF2 pneumatic connector
- Sample gas inlet temperature：Max.200℃(standard)
- Sample gas outlet dew point：≤5℃
- Sample gas cooling temperature：Factory setting is 4℃
- Semiconductor refrigeration capacity：Max.80NL/h
- Fine filtering level：0.1 um
- Resistance to negative pressure：-40000Pa @1L/min
- Pumping capacity：3.3NL/min
- Air inlet interface： SF2 pneumatic connector
- Air outlet interface：OD6/4mm air tube
- Condensate drain interface：OD6/4mm air tube
- Exhaust interface：OD6/4mm air tube
- Power supply：Three-hole plug with switch, 220V 50Hz 300W
- Working temperature： -10℃～+40℃
- Shell material and size：Stainless steel, 370mm*180mm*250mm（length*width*height）
- Warm-up time：≤30min